SUCP2 · Two-bolt thermoplastic pillow block, stainless insert · corrosion resistant
SUCP210
50 mm bore (1 15/16") · insert bearing SUC210 · set screw · pillow block info
Key specifications
- Bore / shaft
- 50 mm (1 15/16")
- Insert bearing
- SUC210
- Housing no.
- SP210
- Insert section
- 6210
- Locking
- Set screw
- Bolt size
- M16
- Dynamic C
- 35.1 kN
- Static C₀
- 23.2 kN
- Weight
- 1.3 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 57.2 |
| Lhousing length | 206 |
| Jbolt centres | 159 |
| Abase width | 60 |
| Nbolt hole | 20 |
| N1 | 23 |
| H1base thickness | 22 |
| H2overall height | 111 |
| Binsert width | 51.6 |
| S | 19 |
Interchange references
- SSUCP210
- SP210 housing
- SUC210 insert
- UCP210 (cast iron equivalent)
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.