SUCP2 · Two-bolt thermoplastic pillow block, stainless insert · corrosion resistant
SUCP212
60 mm bore (2 7/16") · insert bearing SUC212 · set screw · pillow block info
Key specifications
- Bore / shaft
- 60 mm (2 7/16")
- Insert bearing
- SUC212
- Housing no.
- SP212
- Insert section
- 6212
- Locking
- Set screw
- Bolt size
- M16
- Dynamic C
- 47.5 kN
- Static C₀
- 32.5 kN
- Weight
- 2.07 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 69.9 |
| Lhousing length | 241 |
| Jbolt centres | 184 |
| Abase width | 65 |
| Nbolt hole | 20 |
| N1 | 23 |
| H1base thickness | 27 |
| H2overall height | 136 |
| Binsert width | 65.1 |
| S | 25.4 |
Interchange references
- SSUCP212
- SP212 housing
- SUC212 insert
- UCP212 (cast iron equivalent)
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.