Three-bolt triangular flange · zinc plated pressed steel

PFT200 Series — 21 sizes

Pressed steel three-bolt triangular flange unit. The third bolt adds torsional stability where the plate is thin or the drive is belt-loaded, while keeping the same insert bearing and bore range as PFL and PFC.

Zinc plated three-bolt triangular flange bearing unit — PFT200 series — Representative PFT200 housing unit.

PFT200 size charts by insert series

All dimensions in mm

UC insert units

Wide-inner-ring insert with set-screw locking. UC dimensions and load ratings apply only to this table.

UC insert PFT200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	Da	H	L	A	J	A1	H1	H2	N	C kN	C₀ kN	kg
UCPFT203	17	UC203	27.4	12	40	82	60	15	63.5	4.5	29	49	7.1	9.95	4.75	0.11
UCPFT204	20	UC204	31	14	47	91	68	17	71.5	4.5	34	56	9	12.8	6.65	0.13
UCPFT205	25	UC205	34.1	15	52	96	72	19	76	4.5	36	61	9	14	7.85	0.14
UCPFT206	30	UC206	38.1	16	62	114	82	20	90.5	5.5	41	72	11	19.5	11.3	0.25
UCPFT207	35	UC207	42.9	17	72	127	95	23	100	5.5	45	81	11	25.7	15.3	0.4
UCPFT208	40	UC208	49.2	18	80	149	—	23	119	7	91	—	13.5	29.1	17.8	0.5
UCPFT209	45	UC209	49.2	19	85	150	—	23	120.5	7	98	—	13.5	32.5	20.4	0.6

SB insert units

Narrow-inner-ring insert with set-screw locking. SB widths and ratings are listed separately from UC.

SB insert PFT200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	Da	H	L	A	J	A1	H1	H2	N	C kN	C₀ kN	kg
SBPFT203	17	SB203	22	12	40	82	60	15	63.5	4.5	29	49	7.1	9.55	4.78	0.11
SBPFT204	20	SB204	25	14	47	91	68	17	71.5	4.5	34	56	9	10.4	5	0.13
SBPFT205	25	SB205	27	15	52	96	72	19	76	4.5	36	61	9	On request	On request	0.14
SBPFT206	30	SB206	30	16	62	114	82	20	90.5	5.5	41	72	11	15.7	8.64	0.25
SBPFT207	35	SB207	32	17	72	127	95	23	100	5.5	45	81	11	20.8	11.7	0.4
SBPFT208	40	SB208	34	18	80	149	—	23	119	7	91	—	13.5	On request	On request	0.5
SBPFT209	45	SB209	41.2	19	85	150	—	23	120.5	7	98	—	13.5	On request	On request	0.6

SA insert units

Eccentric-collar insert. Unverified manufacturer-specific widths and ratings are shown as on request, not copied from UC or SB.

SA insert PFT200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	Da	H	L	A	J	A1	H1	H2	N	C kN	C₀ kN	kg
SAPFT203	17	SA203	On request	On request	40	82	60	15	63.5	4.5	29	49	7.1	On request	On request	0.11
SAPFT204	20	SA204	On request	On request	47	91	68	17	71.5	4.5	34	56	9	On request	On request	0.13
SAPFT205	25	SA205	On request	On request	52	96	72	19	76	4.5	36	61	9	On request	On request	0.14
SAPFT206	30	SA206	On request	On request	62	114	82	20	90.5	5.5	41	72	11	On request	On request	0.25
SAPFT207	35	SA207	On request	On request	72	127	95	23	100	5.5	45	81	11	On request	On request	0.4
SAPFT208	40	SA208	On request	On request	80	149	—	23	119	7	91	—	13.5	On request	On request	0.5
SAPFT209	45	SA209	On request	On request	85	150	—	23	120.5	7	98	—	13.5	On request	On request	0.6

Bi is inner-ring width; Be is outer-ring width. Housing mounting dimensions may be shared where the same PF housing is used, but insert widths and load ratings are family-specific. “On request” means a reliable maker-specific value is not published. Housing: cold-rolled pressed (stamped) steel, zinc plated (electro-galvanised), bright finish.

Other zinc plated series

PP200

Two-bolt pillow block (base mounted) · 19 sizes

PFL200

Two-bolt oval flange, side mounted · 21 sizes

SBPF / PF200 (PFC)

Round pressed flange, 3-bolt (SBPF / PF / PFC) · 21 sizes

KFL000

Miniature two-bolt flange, set screw locking · 8 sizes

UFL000

Miniature two-bolt flange, eccentric collar locking · 8 sizes

Request a quote

Pricing & availability across the range

Products showcased are for educational reference. We do not endorse or promise stock of any listed item.