Two-bolt pillow block (base mounted) · zinc plated pressed steel

PP200 Series — 19 sizes

The classic zinc-plated pressed steel pillow block. Two-bolt base, stamped from sheet steel and zinc plated for corrosion resistance, fitted with a UC, SB or SA wide-inner-ring insert. Bolts straight onto sheet metal, angle iron or timber frames for light to medium duty conveyor, agricultural and fan drives.

Zinc plated two-bolt pillow block (base mounted) bearing unit — PP200 series — Representative PP200 housing unit.

Dimensional drawing for PP200 pressed steel housing — Dimension symbols used in the chart below.

PP200 size charts by insert series

All dimensions in mm

UC insert units

Wide-inner-ring insert with set-screw locking. UC dimensions and load ratings apply only to this table.

UC insert PP200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	H	L	J	A	N	H1	H2	B	S	C kN	C₀ kN	kg
UCPP203	17	UC203	On request	On request	22.2	86	68	25	9.5	3.2	43.8	22	6	9.95	4.75	0.06
UCPP204	20	UC204	On request	On request	25.4	98	76	32	9.5	3.2	50.5	25	7	12.8	6.65	0.08
UCPP205	25	UC205	On request	On request	28.6	108	86	32	11.5	4	56.6	27	7.5	14	7.85	0.1
UCPP206	30	UC206	On request	On request	33.3	117	95	38	11.5	4	66.3	30	8	19.5	11.3	0.15
UCPP207	35	UC207	On request	On request	39.7	129	106	42	11.5	4.6	78	32	8.5	25.7	15.3	0.2
UCPP208	40	UC208	On request	On request	43.7	148	120	—	11.5	5	86.5	34	9	29.1	17.8	0.3
UCPP209	45	UC209	On request	On request	46.8	156	128	—	11.5	6	93.5	41.2	10.2	32.5	20.4	0.3

SB insert units

Narrow-inner-ring insert with set-screw locking. SB widths and ratings are listed separately from UC.

SB insert PP200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	H	L	J	A	N	H1	H2	B	S	C kN	C₀ kN	kg
SBPP201	12	SB201	On request	On request	22.2	86	68	25	9.5	3.2	43.8	22	6	9.95	4.75	0.06
SBPP202	15	SB202	On request	On request	22.2	86	68	25	9.5	3.2	43.8	22	6	9.95	4.75	0.06
SBPP203	17	SB203	On request	On request	22.2	86	68	25	9.5	3.2	43.8	22	6	9.95	4.75	0.06
SBPP204	20	SB204	On request	On request	25.4	98	76	32	9.5	3.2	50.5	25	7	12.8	6.65	0.08
SBPP205	25	SB205	On request	On request	28.6	108	86	32	11.5	4	56.6	27	7.5	14	7.85	0.1
SBPP206	30	SB206	On request	On request	33.3	117	95	38	11.5	4	66.3	30	8	19.5	11.3	0.15
SBPP207	35	SB207	On request	On request	39.7	129	106	42	11.5	4.6	78	32	8.5	25.7	15.3	0.2
SBPP208	40	SB208	On request	On request	43.7	148	120	—	11.5	5	86.5	34	9	29.1	17.8	0.3

SA insert units

Eccentric-collar insert. Unverified manufacturer-specific widths and ratings are shown as on request, not copied from UC or SB.

SA insert PP200 units with separate insert and housing dimensions.
Model	Bore	Insert	Bi	Be	H	L	J	A	N	H1	H2	B	S	C kN	C₀ kN	kg
SAPP204	20	SA204	On request	On request	25.4	98	76	32	9.5	3.2	50.5	25	7	12.8	6.65	0.08
SAPP205	25	SA205	On request	On request	28.6	108	86	32	11.5	4	56.6	27	7.5	14	7.85	0.1
SAPP206	30	SA206	On request	On request	33.3	117	95	38	11.5	4	66.3	30	8	19.5	11.3	0.15
SAPP207	35	SA207	On request	On request	39.7	129	106	42	11.5	4.6	78	32	8.5	25.7	15.3	0.2

Bi is inner-ring width; Be is outer-ring width. Housing mounting dimensions may be shared where the same PF housing is used, but insert widths and load ratings are family-specific. “On request” means a reliable maker-specific value is not published. Housing: cold-rolled pressed (stamped) steel, zinc plated (electro-galvanised), bright finish.

Other zinc plated series

PFL200

Two-bolt oval flange, side mounted · 21 sizes

PFT200

Three-bolt triangular flange · 21 sizes

SBPF / PF200 (PFC)

Round pressed flange, 3-bolt (SBPF / PF / PFC) · 21 sizes

KFL000

Miniature two-bolt flange, set screw locking · 8 sizes

UFL000

Miniature two-bolt flange, eccentric collar locking · 8 sizes

Request a quote

Pricing & availability across the range

Products showcased are for educational reference. We do not endorse or promise stock of any listed item.