SSUCP2 · Two-bolt stainless steel pillow block · corrosion resistant
SSUCP205
25 mm bore (1") · insert bearing SSUC205 · set screw · pillow block info
Key specifications
- Bore / shaft
- 25 mm (1")
- Insert bearing
- SSUC205
- Housing no.
- SSP205
- Insert section
- 6205
- Locking
- Set screw
- Bolt size
- M10
- Dynamic C
- 14 kN
- Static C₀
- 7.85 kN
- Weight
- 0.75 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 36.5 |
| Lhousing length | 140 |
| Jbolt centres | 105 |
| Abase width | 38 |
| Nbolt hole | 13 |
| N1 | 16 |
| H1base thickness | 15 |
| H2overall height | 71 |
| Binsert width | 34.1 |
| S | 14.3 |
Interchange references
- SUCP205
- SSP205 housing
- SSUC205 insert
- UCP205 (cast iron equivalent)
- SUC205
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SSUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.