SSUCP2 · Two-bolt stainless steel pillow block · corrosion resistant
SSUCP207
35 mm bore (1 3/8") · insert bearing SSUC207 · set screw · pillow block info
Key specifications
- Bore / shaft
- 35 mm (1 3/8")
- Insert bearing
- SSUC207
- Housing no.
- SSP207
- Insert section
- 6207
- Locking
- Set screw
- Bolt size
- M14
- Dynamic C
- 25.7 kN
- Static C₀
- 15.3 kN
- Weight
- 1.5 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 47.6 |
| Lhousing length | 167 |
| Jbolt centres | 127 |
| Abase width | 48 |
| Nbolt hole | 17 |
| N1 | 20 |
| H1base thickness | 18 |
| H2overall height | 93 |
| Binsert width | 42.9 |
| S | 17.5 |
Interchange references
- SUCP207
- SSP207 housing
- SSUC207 insert
- UCP207 (cast iron equivalent)
- SUC207
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SSUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.