SSUCP2 · Two-bolt stainless steel pillow block · corrosion resistant
SSUCP211
55 mm bore (2 3/16") · insert bearing SSUC211 · set screw · pillow block info
Key specifications
- Bore / shaft
- 55 mm (2 3/16")
- Insert bearing
- SSUC211
- Housing no.
- SSP211
- Insert section
- 6211
- Locking
- Set screw
- Bolt size
- M16
- Dynamic C
- 43.6 kN
- Static C₀
- 29 kN
- Weight
- 3.6 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 63.5 |
| Lhousing length | 219 |
| Jbolt centres | 171 |
| Abase width | 60 |
| Nbolt hole | 20 |
| N1 | 23 |
| H1base thickness | 25 |
| H2overall height | 123 |
| Binsert width | 55.6 |
| S | 22.2 |
Interchange references
- SUCP211
- SSP211 housing
- SSUC211 insert
- UCP211 (cast iron equivalent)
- SUC211
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SSUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.