SSUCP2 · Two-bolt stainless steel pillow block · corrosion resistant
SSUCP208
40 mm bore (1 1/2") · insert bearing SSUC208 · set screw · pillow block info
Key specifications
- Bore / shaft
- 40 mm (1 1/2")
- Insert bearing
- SSUC208
- Housing no.
- SSP208
- Insert section
- 6208
- Locking
- Set screw
- Bolt size
- M14
- Dynamic C
- 29.1 kN
- Static C₀
- 17.8 kN
- Weight
- 1.9 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Hshaft centre height | 49.2 |
| Lhousing length | 184 |
| Jbolt centres | 137 |
| Abase width | 54 |
| Nbolt hole | 17 |
| N1 | 20 |
| H1base thickness | 19 |
| H2overall height | 98 |
| Binsert width | 49.2 |
| S | 19 |
Interchange references
- SUCP208
- SSP208 housing
- SSUC208 insert
- UCP208 (cast iron equivalent)
- SUC208
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related SSUCP2 sizes
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.