PTFE end caps · Closed PTFE / Teflon end cap for pillow blocks and flange units · corrosion resistant
PTFE-CAP-211
55 mm bore (2 3/16") · insert bearing SSUC211 / UC211 · set screw · pillow block info
Key specifications
- Bore / shaft
- 55 mm (2 3/16")
- Insert bearing
- SSUC211 / UC211
- Housing no.
- CAP211
- Insert section
- 6211
- Locking
- Set screw
- Bolt size
- M16
- Dynamic C
- 43.6 kN
- Static C₀
- 29 kN
- Weight
- 0.02 kg
- Finish
- Passivated stainless, natural polymer — no paint or plating to flake
- Seals / grease
- Food-grade rubber lip seals, FDA-compliant grease fill
- Temperature
- -30 °C to +120 °C continuous (PTFE block to +150 °C)
Nominal dimensions
All values in mm
| Symbol | Value (mm) |
|---|---|
| Dacap outside diameter | 100 |
| Bcap depth | — |
Interchange references
- End cap for UC211
- End cap for SSUC211
- PTFE cover 211
Cross-references are dimensional equivalents from common supplier catalogues, not manufacturer endorsements.
Related PTFE end caps sizes
- PTFE-CAP-204bore 20 mm · SSUC204 / UC204
- PTFE-CAP-205bore 25 mm · SSUC205 / UC205
- PTFE-CAP-206bore 30 mm · SSUC206 / UC206
- PTFE-CAP-207bore 35 mm · SSUC207 / UC207
- PTFE-CAP-208bore 40 mm · SSUC208 / UC208
- PTFE-CAP-209bore 45 mm · SSUC209 / UC209
- PTFE-CAP-210bore 50 mm · SSUC210 / UC210
- PTFE-CAP-212bore 60 mm · SSUC212 / UC212
Dimensions are nominal catalogue values and load ratings are indicative. Products showcased are for educational reference — we do not endorse or promise stock of any listed item.