

Heavy-duty four-bolt flange unit
UCFS328
140 mm shaft support with a one-piece cast-iron FS328 housing, UC328 ball-bearing insert and set-screw locking. Contact seals use nitrile rubber; the supplied catalogue specifies non-relubricatable lubrication.
- Bore
- 140 mm
- Dynamic load
- 253 kN
- Weight
- 98 kg
Price, availability and lead time confirmed on quotation.
Technical specifications
| Type | 4-bolt square flanged unit |
|---|---|
| Bearing type | Ball bearing |
| Insert bearing | UC328 |
| Housing | FS328 |
| Housing material | Cast iron, 1 piece |
| Locking device | Set screw |
| Seal type | Contact |
| Seal material | Nitrile rubber |
| End type | Open |
| Performance | Heavy duty |
| Dynamic load (Cr) | 253.00 kN |
| Static load (C0r) | 246.00 kN |
| Maximum speed | 1,475 rpm |
| Weight | 98.000 kg |
| Operating temperature | -40 to 120 °C |
| Lubrication | Non-relubricatable |
Dimensions
| Dimension | mm | inches |
|---|---|---|
| d — bore | 140.000 | 5.5120 |
| L — flange length | 450.0 | 17.7165 |
| J — bolt spacing | 350.0 | 13.7795 |
| A | 125.0 | 4.9213 |
| A0 | 161.000 | 6.3386 |
| A1 | 55.0 | 2.1654 |
| A2 | 45.0 | 1.7717 |
| A3 | 30.0 | 1.1811 |
| H3 | 400.0 | 15.748 |
| N — bolt hole (4×) | 41.0 | 1.6142 |
| B — insert width | 145.000 | 5.7087 |
| S | 59.000 | 2.3228 |
UCFS328 is distinct from UCF328 D1. This sheet specifies FS328 housing, 98 kg weight, A2 = 45 mm, A3 = 30 mm and H3 = 400 mm. Check the mounting drawing before selecting a replacement.
Compare UCF328 D1UCFS328 SLS datasheet
SLS-branded technical reference using the supplied catalogue specifications and our original logo. Not a manufacturer-issued certificate.
Open datasheet in new tab